Swimming in the pool at hot summer noon is so satisfying. The pool is the ultimate solution to remove all the stress from work besides enjoying the weekend. But the thing which is giving such services. You have to take care of the pool. So, the first step of taking care is to keep the pool clean all the time. While cleaning your pool, you may face some problems using the Baracuda pool cleaner. To solve them, you must need help from an expert. And I have organized all the necessary information about the ways of solving the problem. The article can keep you aware of every idea and solution to lessen the Baracuda pool cleaner troubleshooting.

Problems with Baracuda Pool Cleaner:

There is not one problem you can say confidently. The Baracuda pool cleaner creates a handful number of tensions while cleaning the house pool. I have addressed some of those problems-

  • The Baracuda cleaner does not move in a sequence whereas Dolphin Pool Cleaners has it.
  • It becomes slow while running at a stretch,
  • The cleaner can not cover the cleaning of the whole pool,
  • Sometimes, the cleaner paused suddenly,
  • It stays on the walls or edges except going all over the house pool,
  • The cleaner sometimes becomes unable to climb the walls of the pool.

I personally recommend Dolphin automatic pool cleaner for your pool. It has a very good customer review online.

How to Troubleshoot the Baracuda Pool Cleaner?

There is always a way to the problems. I have especially arranged this part for the beginners to experts. Follow the steps to troubleshoot the pool cleaner. It will start working like before.

  • When the pool cleaner does not move accurately:¬†

First, close the main drain. Ensure the water flow. Withdraw water from the pump basket and filter. For checking any damage, check the diaphragm. The air should be checked in the system. If the water level in the pump basket lowers or you detect abnormal air bubbles in the pump basket, that means air is present in the system. Tighten all fittings in the pump. Finally, look at the o-ring in the pump.

  • When the cleaner is unable to cover the whole pool:

To verify the water flow, check the flow gauge. If you feel necessary, then add a return diverter. You should check if the return fittings are down or not. Ensure the correct hose weight position. Move the hose weight slightly from the cleaner. Lastly, the ideal hose length has to be confirmed.

  • When the cleaner hinders at the steps:

You have to use a flow gauge if the water flow is not smooth. The hose length is another element to check and confirm.

You can shorten the length if needed. To guide the cleaner, use the return jets.

  • When the cleaner does not move from the walls of the pool:

Firstly, decrease the water flow to the cleaner by using the flow gauge as a guide. Also, ensure the hose weight is in the ideal position. You will need to move the cleaner a bit from the hose weight to ensure the smooth function of the instrument.

Final Verdict 

A Baracuda pool cleaner is such a piece of excellent equipment. It has made the cleaning process lot easier than before.

But everything has its opposite side. The pool cleaner sometimes troubles it while cleaning the pool. You can not put the cleaner into the trash because of the trouble. Instead, you will need to solve the problem. And regarding the purpose, I have designed the article.

You have known how to troubleshoot the Barracuda pool cleaner throughout the article. Enjoy swimming in the pool water. The cleaner can not make any trouble now. You have become a pool cleaner expert!