Do you want to learn how to empty above ground pool? We already know that your answer is yes. And that is why you’re reading this article. So, we want to try as much as possible to make the process simple for you.

Pools are not to be emptied regularly because of the hassles of draining and filling them whenever you need to use them. It is advisable to take care of the pool instead. Maintaining an above-ground pool is another topic of discussion. In the meantime, we can focus on how to drain the water in an above-ground pool.

How to empty your above-ground pool?

You have understood some of the reasons why you may need to empty your above-ground pool. Now, to perform the task in question, you can follow some of the steps explained below.

1. Look for where to channel the water

If you are emptying your pool for the first time, you need to determine where to channel the water or where you want the water to go. Some people direct it to the gutter or drainage.

If this is your plan, you need to confirm with the relevant authorities as this is against some local regulations.

2. Get a garden hose:

Using a garden hose is the cheapest method to drain your pool water. It would help if you had a garden hose, whether you have an in-ground pool or an above-ground pool.

3. Get a submersible pump:

If you already have the garden hose, get a submersible pump and a backwash hose. Clamp the backwash hose into the submersible pump. After clamping, if there’s any excess, you can restrict it with electrical tape.

4. Unravel the backwash hose:

When you are sure that the backwash hose is completely clamped to the submersible pump, unravel the backwash hose. Move the hose end towards the gutter or sewer drain or wherever you’d like to drain the water. This process is called reversing the water.

5. Submerge the pump into the pool:

After rolling your hose to the sewer drain from the other end, submerge the pump into the pool. A shallow end of the pool will be much better.

6. Turn on the pump:

Turn the submersible pump on by plugging it into an electrical outlet on the wall. Once the pumping machine is on, water will start pumping through the backwash hose.

When siphoning water, you need to monitor the progress of development as the pumping process may take some time. You should turn off the pumping machine when water gets to the level that it can no longer pass through your garden hose.

7. Use a wet/dry vacuum:

When you notice that the water can no longer pass through the backwash hose, get a wet/dry vacuum. Use this vacuum to suction the water out of the pool. This development will make the pool dry completely.

Another method:

If you don’t have a submersible pump, another way to suction the water out of the pool is to use your mouth. Place the hose end unto your mouth then suction the water until you feel it in your mouth. This development is similar to the process of siphoning gas from a fuel tank into a gallon. If you know how to do this, then siphoning water from your pool using a garden hose will be easy.

How to Drain an Above Ground Pool Without a Pump?


An above-ground pool is a great way to stay cool in the summertime. But when it comes time to close up your pool for the season, you may find yourself wondering how to drain an above-ground pool without a pump. However, there are several ways that you can drain an above-ground pool without a pump:

1. Draining With Gravity:

One of the simplest and most cost-effective ways to drain an above-ground pool without a pump is to use gravity. To do this, you will need to get some kind of hose or tubing that is long enough to reach from the pool to a lower level (ideally downhill). You can then attach this hose or tubing to the drain plug at the bottom of your pool and allow gravity to pull the water out. This method works best if your pool is completely full and you have access to a sloped area.

2. Using Water Removal Bags:

Another way that you can drain an above-ground pool without a pump is by using water removal bags. These are large sacks that can be filled with water from your pool and emptied into a lower area. You will need to attach the bag to your pool’s skimmer or drain plug using a hose. Once you have filled the bag with water, you can then transport it to an area that is at least one foot below the level of the pool. This method works best if you don’t have access to any sloped areas nearby and it can be time-consuming depending on how large your above-ground pool is.

3. Using a Pool Vacuum:

If you own a pool vacuum, then this can also be used as an effective way of draining an above-ground pool without a pump. To do this, simply attach the vacuum head to your skimmer and turn it on. The suction from the vacuum will draw out the water from your pool and into a bucket or other container. This method works best if you have access to a lower area where you can empty the water, as it can be quite time-consuming otherwise.

4. Using Towels or Sponges:

Another way to drain an above-ground pool without a pump is by using towels or sponges. Simply place several large towels or sponges at the bottom of your pool and then use them to soak up any excess water. You can then wring out the towels into a bucket or other container and transport the water to a lower level for disposal. This method is best used in smaller pools and should only be used if all other methods are not possible.


Why should you empty your pool?

You learned that it isn’t right to empty your pool frequently or regularly. This development will cost you time and even more money. It is cheaper and more convenient to maintain the pool.

So, what reasons can warrant you to empty your pool? We will look at some reasons why you may need to drain your pool.

1. To change the water:

You may be wondering why we said you could change your water just after telling you that regularly changing your pool water isn’t advisable. Well, you can change the water in your pool once in a while.

When you think the water has become stale, the sensible action to take is to replace it. And to change the water, you need to empty the pool first.

2. When there is a leak:

Another reason for changing your pool water is when you observe that there is a leak. When this problem occurs, empty the pool and then fix the leaking spot. After fixing the leakage, refill the pool and then start enjoying yourself.

3. To replace the pool liner:

You may have to drain the water in the pool if you need to replace your pool liner. Sometimes, you can repair a pool liner with water in the pool.

But in certain other situations, it is better to empty the pool before working on the liner. So, you will decide whether to empty the pool or not, depending on the situation.

4. Moving to a new location:

If you’re changing your location, it is only reasonable to empty the pool before moving it. You know that it is nearly impossible to carry a pool with water into a truck, let alone transport it to the new location.

Trying such an insane task will only amount to flooding the whole house. Not to talk of the damage it can do to the pool itself.

5. Storing the pool:

Another reason that may warrant you to empty your pool is if you want to store it. Usually, this happens during winter. You must drain the water if you have to keep it till the summer when you’ll need it again.

Final Verdict:

We have provided two easy and comfortable methods on how to empty above-ground pools. If you don’t have a submersible pump, you can use your mouth for the suctioning process.

To get a submersible pump or any pool maintenance kit, you may check through various online platforms. They also offer all materials for setting up both in-ground and above-ground pools at affordable prices.